Lubrication Tsav

YE3 series low voltage lubrication motor is independently developed by SIMO company. The coolant mode is IC411, which meets with regulations of GB/T 755 Rotating Electrical Machines- Ratings and Performance and JB/T 13299 Specifications for YE4-series (IP55) High Efficiency Three-phase Induction Motor (Frame size 63-355). Its efficiency value complies with the grade 2 energy efficiency standard in GB 18613-2020 and is consistent with the lE4 in the international standard IEC 60034- Energy Efficiency Grade of Single Speed Three Phase Cage Induction Motors. This series of products can completely replace the obsolete products of low-voltage three-phase asynchronous motors, such as Y, YGM, YGM2, YE2 and YE3-series of motor.

Xa kev nug

Hauj lwm lawm

Kev tsis

The bearings and bearing covers must be clean and free of any foreign objects such as kerosene. New lubricating grease should be clean and free of deterioration, and the model must be correct. Different models of grease should not be used at the same time. The amount of oil added should be 2/3-3/4 of the bearing capacity (for low-speed motors) and 1/2-2/3 (for high-speed motors).

should be added according to the number of motor poles. The amount of lubricating grease for two pole motor bearings is one-third of the inner cavity of the bearing, and the amount of lubricating grease for four to six to eight pole motor bearings is half of the inner cavity of the bearing. Do not overfill. Firstly, it may cause excessive bearing resistance and burn out the bearing. Secondly, lubricating grease may be thrown onto the winding coil after rotation, causing the winding coil to burn out.

	H180-H225
	22KW
	380V, 400V, 415V, 460V, 490V, 660V, 690V
	50Hz, 60Hz
	2P, 4P, 6P, 8P
	3000rpm, 1500rpm, 1000rpm, 750rpm
	IC411
	IP55
	F(155 degree ), H(180 degree )
	S1, S4, S5, S6, S9
	B3

	IE3